KitchenAid Range Code F5 E0: oven door latch or door switch

What F5 E0 means

F5 E0 on KitchenAid freestanding and slide-in ranges, among them the KFGG500ESS and KSEG700ESS, points to the oven door latch assembly, the door switch, or the wiring. Where the plain F5 names the latch switches, this reading names the door switch. The display shows F5 E0, and the oven may not start a cycle because the door state cannot be confirmed.

Common causes of F5 E0

The oven door latch assembly is not moving freely
The door switch is not telling the control the door is closed
Wiring to the latch or the switch is loose or damaged

✓ One safe check you can try

1. Press Cancel and make sure the oven is cool. 2. Close the door firmly and check the gasket for anything caught. 3. Take out any rack or pan touching the door. 4. Turn the range off at its breaker for a minute and restore power. 5. If F5 E0 returns, stop and call us without forcing the door.

! Why to stop there

Latch work is done inside the oven frame next to wiring that stays live
A switch problem and a latch problem can look the same until tested

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Press Cancel to ResetKitchenAid Range Message "Press Cancel to Reset": Clear the Error Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting

F5 E0F5 E0 questions

What does the door switch do?

It tells the control whether the door is closed. F5 E0 points to that switch, the latch assembly, or the wiring, so the control cannot confirm the door position.

Why did F5 E0 start after I slammed the door?

A hard slam can shift a latch or loosen a connector, which fits the listed parts. It is worth telling us if you noticed it, since the detail helps us decide where to look first.

Do you replace latches on the first visit?

Often yes, when the part is available to us. We test first, quote the price in writing before the work, and cover the repair with a 30-day workmanship warranty from the day we finish.