KitchenAid Range Code F6: the oven control or its wiring

What F6 means

On KitchenAid freestanding and slide-in electric, gas and dual-fuel ranges, such as the KFEG500ESS or KFGG500ESS, F6 means there may be a problem with the oven control or its wiring. This is the general form of the code, without a second digit. The display shows F6 and the oven may refuse to run until the control is cleared. A technician checks the control and its connections.

Common causes of F6

The oven control itself
Wiring connected to the oven control

✓ One safe check you can try

1. Press Cancel and see whether F6 clears. 2. Switch the range off at its breaker for one minute, then restore power. 3. Wait a minute with the oven idle to see whether F6 comes back. 4. If you smell gas, leave the house and call the gas utility from outside.

! Why to stop there

The oven control is electronics that need testing with the range pulled out and opened.
Replacing a control without tracing the wiring can mean the code returns.
We give a written price before work and a 30-day warranty afterward.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights

F6F6 questions

What does a bare F6 mean?

It points to the oven control or the wiring that serves it. Longer codes such as F6 E0 or F6 E5 narrow the problem down to a specific part, such as the appliance manager or the user interface.

Is it safe to use the cooktop?

The code is about the oven control. If the cooktop burners or elements respond normally you can use them with care, but stop at once if you notice a burning smell or anything unusual.

Will a power reset clear it?

Sometimes the display clears after a reset at the breaker. If F6 returns when you use the oven, the control or its wiring needs a technician, and repeated resets will not change that.