KitchenAid Range Code F7 E1: door switch reading wrong

What F7 E1 means

On KitchenAid freestanding and slide-in ranges including the KSEG700ESS and KSGG700ESS, F7 E1 points to the door switch, or to the wiring that connects it to the control, as the area to examine. The door switch tells the control whether the oven door is open or closed. When it misreports, you may see the code and find the oven light or heating behaving oddly with the door shut.

Common causes of F7 E1

The door switch
Wiring that serves the door switch

✓ One safe check you can try

1. Close the oven door firmly and clear its edge of any foil, pan handles or towels. 2. Press Cancel. 3. Turn the range off at the breaker for a minute and restore power. 4. If F7 E1 comes back, stop using the oven and call us.

! Why to stop there

The switch is tucked behind the door frame and needs testing with a meter.
Wiring trouble is not visible from the outside.
Our price is written before work starts, and the repair carries a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights Understanding Tones or BeepsKitchenAid Range Message "Understanding Tones or Beeps": when the range sounds

F7 E1F7 E1 questions

What is a door switch?

A small switch that tells the oven control whether the door is closed. F7 E1 means the switch or its wiring may have a problem, so the control may misread the door position.

Why does the code appear with the door shut?

The control may not be getting the closed signal from the switch. That is the kind of problem F7 E1 refers to, and it needs a technician to confirm with a meter.

How is it different from F7 E0?

F7 E0 names the door latch assembly, while F7 E1 names the door switch. Both concern the oven door, so one visit can look at the whole door area.