KitchenAid Range Code FC E5: antenna side of the Wi-Fi link

What FC E5 means

FC E5 is a second Wi-Fi antenna code for KitchenAid freestanding and slide-in ranges, including the KFEG500ESS and KSGG700ESS. The published meaning is that there may be a problem with the Wi-Fi antenna or the associated wiring. You will notice the range dropping off the app or refusing to pair, while the oven itself keeps its normal controls and heating.

Common causes of FC E5

The Wi-Fi antenna
Associated wiring

✓ One safe check you can try

1. Check that the router works for other devices. 2. Switch the range breaker off for a minute and on again. 3. Reconnect the range in the app. 4. If FC E5 reappears, arrange a visit instead of repeating the steps.

! Why to stop there

Antenna problems cannot be diagnosed from the front of the range.
Repeat pairing attempts waste time when the antenna is the cause.
A written price comes first, and we give a 30-day warranty on the work.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeKitchenAid Range Display "Probe" or "Insert Probe": Meat Probe Needed PUSH or PSHKitchenAid Range Display "PUSH" or "PSH": Start Not Pressed Remote Indicator LightKitchenAid Commercial-Style Range Remote Indicator Light: Remote-Enabled Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights

FC E5FC E5 questions

Why does my range lose its app link?

With FC E5 the Wi-Fi antenna or its wiring may be the problem, so the range cannot hold the signal even when your router is working well.

Does my router need replacing?

Not for this code. It points at the antenna inside the range, so a new router would not change anything. Check that other devices connect, then call us.

Is anything unsafe?

No safety concern is tied to the code, but the connection stays down until the antenna side is checked. Cooking controls on the range continue to work as normal.