KitchenAid Induction Cooktop Code F0E1: the pan is not suitable for induction

What F0E1 means

On KitchenAid induction cooktops like the KCIG550JSS, F0E1 is a cookware question. The cooktop heats only pans made of ferromagnetic material, such as enameled steel, cast iron or stainless steel designed for induction. If the pan does not suit it, the zone refuses to heat and shows F0E1, which owners often meet when trying aluminum, copper or glass cookware. The code usually clears the moment suitable cookware is placed on the zone.

Common causes of F0E1

Cookware that is not ferromagnetic
A pan too small or off center on the zone
Stainless steel that is not induction rated
A pan-detection problem if proper cookware still triggers it

✓ One safe check you can try

1. Turn the zone off and remove the pan. 2. Hold a magnet to the bottom of the pan; if it does not stick, use another pan. 3. Pick enameled steel, cast iron or induction-rated stainless and center it. 4. Restart the zone, and call us if F0E1 appears with a magnetic pan.

! Why to stop there

If the code appears with proper induction cookware, the sensing circuit itself may have failed.
That circuit sits beneath the glass with high voltage.
Our estimate is written before work, and our repairs carry a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

F0E1F0E1 questions

Which pans work when F0E1 shows up?

Pans a magnet sticks to: enameled steel, cast iron and stainless steel made for induction. Aluminum, copper and glass alone will not heat, which is why F0E1 appears.

My pan is stainless steel, so why the code?

Not all stainless is magnetic. Many pots use grades that induction cannot heat. Try the magnet test on the bottom of the pan before deciding the cooktop has a problem.

When does F0E1 mean a repair?

If several magnetic pans of different sizes all trigger it, the cooktop may be failing to detect them. At that point we would test the zone and its sensing.