KitchenAid Dishwasher Code F1E1: control module or fill valve operation

What F1E1 means

On KitchenAid built-in dishwashers with the F#E# control, such as the KDTM404KPS and KDFE104HPS, F1E1 points to the control module. It is also described as the dishwasher failing to operate the fill valve correctly. The drain sequence begins and operation is prevented. You see F1E1 on the display, or a blink pattern of one, pause, one on LED models. The cycle will not continue.

Common causes of F1E1

The control module is not handling the fill valve correctly.
The fill valve is not responding to the control.
A control condition that persists after cycling the power.

✓ One safe check you can try

1. Turn off power for 30 seconds and restore it. 2. If F1E1 comes back, turn off the water supply. 3. If you cannot turn the water off, do not cut power; keep the door closed and press Cancel once. 4. Let the drain finish. 5. Call us if the code returns.

! Why to stop there

Control module and fill valve call for equipment testing.
Uncontrolled filling is a flooding risk.
The price comes in writing before any work, and repairs are covered for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

H2OKitchenAid Dishwasher Display H2O: water not detected during fill Sanitize Light FlashingKitchenAid Dishwasher Sanitize Light Flashing: sanitization temperature not met Sanitized light blinking (legacy)KitchenAid Legacy Dishwasher Sanitized Light Blinking: load is not sanitized Start/Resume light blinking (legacy and current)KitchenAid Dishwasher Start/Resume Light Blinking: cycle paused, press within 4 seconds F7E2KitchenAid Dishwasher Code F7E2: wash motor error F8E1KitchenAid Dishwasher Code F8E1: not detecting water, same as H2O F8E2KitchenAid Dishwasher Code F8E2: fill valve electrical error F8E4KitchenAid Dishwasher Code F8E4: water in the base, drain sequence runs

F1E1F1E1 questions

What does F1E1 mean?

The control module is flagged, and the dishwasher cannot operate the fill valve correctly. It drains and blocks operation as a precaution. It points at the control rather than at your plumbing.

Will a power cycle clear F1E1?

Cycling power for 30 seconds is the first step and sometimes clears it. If the code returns, schedule service rather than repeating resets. Resets can be tried once before booking.

Is a leak possible with F1E1?

If the fill valve misbehaves, yes. Shut off the water, keep the door closed and press Cancel once. Then call us for a written quote.