KitchenAid Dishwasher Code F2E1: stuck key or console error

What F2E1 means

On KitchenAid built-in dishwashers with the F#E# control, such as the KDTM404KPS and KDTE204KPS, F2E1 means a stuck key or a console error. The control sees a button as pressed continuously, or the console reports a problem. You see F2E1 on the display, and the buttons may not start a cycle. Cycling the power is the first step. Pressing buttons may do nothing.

Common causes of F2E1

A keypad button is stuck or pressed continuously.
Moisture or debris is affecting the console.
A console or control board problem that a power cycle does not clear.

✓ One safe check you can try

1. Look at the panel for anything pressing a button, such as a towel or a dish. 2. Wipe the panel dry with a soft cloth. 3. Turn off the breaker for about 30 seconds and restore it. 4. Press each button lightly and see whether the display responds. 5. If F2E1 returns, call us.

! Why to stop there

A stuck key can mean a new keypad or control.
Moisture behind the panel can spread to neighboring parts if ignored.
The estimate is written down first; our repair carries a 30-day guarantee.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

F2E1F2E1 questions

What does F2E1 point to?

A stuck key or a console error. The control believes a button is held down, or the console is sending a bad signal, so it displays F2E1.

Can cleaning help?

Wiping the panel and clearing anything pressing on it can help. Then cycle power at the breaker. If the code returns, the keypad or console needs service.

Is it expensive to fix?

We test first and give you the price in writing before work. Our repair has a 30-day warranty. A keypad that is only damp often recovers after drying out; a failed key does not.