KitchenAid Range Code FC E2: the network link is not holding

What FC E2 means

FC E2 can appear on KitchenAid Wi-Fi ranges like the KFGG500ESS or KSEG700ESS when the link drops because of a time out, a weak signal, a router that has stopped working, or the range's own Wi-Fi module and its wiring. The meaning is the same as for FC E1 and FC E3. Cooking features are normally independent of the connection.

Common causes of FC E2

A connection time out
Weak signal where the range stands
A failed router
The range's Wi-Fi module or wiring

✓ One safe check you can try

1. Restart your router and wait until it is back online. 2. Check the signal with a phone held near the range. 3. Cut power to the range at the breaker for a minute, then restore it. 4. Run the app setup again. If FC E2 returns, contact us.

! Why to stop there

A technician can separate a home-network cause from a module cause.
The module is behind panels that stay closed for owners.
We quote in writing first and give a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Sabbath ModeKitchenAid Range "Sabbath Mode": Bake Stays On Sabbath, Sab, 5Ab, or 5A7KitchenAid Range Code Sabbath, Sab, 5Ab, or 5A7: Sabbath Mode is on Start Button BlinkingKitchenAid Range Message "Start Button Blinking": press Start to begin Start Button - Solid LightKitchenAid Range Message "Start Button - Solid Light": Sabbath Mode lighting Temp/Mod KnobKitchenAid Range Message "Temp/Mod Knob": solid white indicator lights Understanding Tones or BeepsKitchenAid Range Message "Understanding Tones or Beeps": when the range sounds White Blinking LightsKitchenAid Range Message "White Blinking Lights": oven waiting at Start WiFi Indicator LightKitchenAid Range Message "WiFi Indicator Light": connectivity status lamp

FC E2FC E2 questions

What is the quickest fix for FC E2?

Restart the router, reset the range power at the breaker, then reconnect through the app. Many connection problems end there, and it costs nothing to try.

Does a stronger signal help?

Yes. Poor signal strength is one of the listed causes, so a closer router or an extender can resolve it, especially if the kitchen is far from the router.

When do I call you?

When the router and signal are fine and FC E2 still returns after a reset, the range's Wi-Fi module or wiring needs checking, and we do that on a visit.