KitchenAid Front-Load Washer Code FH: no or low water supply

What FH means

On older KitchenAid KHWS front-load washers (about 2005 to 2008) and Pro Line KHWV washers, such as the KHWS01PWH, KHWS02RMT and KHWV01RSS, FH means a water inlet problem: there is no water or an insufficient water supply. Owners see the cycle stop early with little or no water in the drum. The recommended response is to press PAUSE/OFF (PAUSE/CANCEL) twice, unplug the washer, and check the water supply.

Common causes of FH

The water faucets are not fully on
The inlet screens are blocked
A fill hose is kinked or frozen

✓ One safe check you can try

1. Press PAUSE/OFF (PAUSE/CANCEL) twice and unplug the washer. 2. Check that both water faucets are fully on. 3. Look at the inlet screens and the fill hoses for blockage, kinks or freezing. 4. Reconnect the hoses and restart the washer. 5. If FH remains, call us.

! Why to stop there

Faucets, screens and hoses are quick owner checks that often solve it
Replacing parts without checking the supply wastes money
If FH returns with water fully on, we diagnose the inlet and quote in writing before work

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

SUDKitchenAid Front-Load Washer Message "SUD": suds routine running AbKitchenAid Pro Line Washer Code Ab: add bleach prompt F02KitchenAid Front-Load Washer Code F02: drain problem F4 to F16 ('F' variables)KitchenAid Front-Load Washer Codes F4 to F16: electrical problem rLKitchenAid Pro Line Washer Code rL: remove load

FHFH questions

What does FH mean?

FH is the Water Inlet Problem code, meaning no water or an insufficient water supply reached the washer. It appears on KHWS and Pro Line KHWV models.

What do I check first?

Press PAUSE/OFF twice, unplug, then check that faucets are fully on, the inlet screens are clear, and the hoses are not kinked or frozen. Reconnect and restart.

When do I call you?

If FH comes back after the supply is confirmed and the hoses are clear, call us. The inlet needs inspection, and we will give a written price before any work.