KitchenAid KDPM804K Dishwasher Repair
The KDPM804K goes by the KDPM804KBS and KDPM804KPS numbers too, depending on the finish. It is the kind of dishwasher a homeowner installs in a kitchen remodel, and we most often see it after a few years, when the filter and sump have collected enough residue to slow the drain.
We start with the filter and the sump, because a clear drain path solves more calls than any part. Then we test the pump by running a drain cycle, check the spray arm jets for debris, and close the door slowly to see whether the latch switch registers it. If a rack is washing poorly we trace the water to that arm. Our written price comes first, and the repair comes with a 30-day workmanship warranty.
The filter and sump. Debris there restricts drainage and spoils the water. We clean them and run a drain cycle to see whether the pump clears the tub normally.
A blocked spray arm is the usual cause. We clear the jets, make sure the arm spins freely, and check the water path to that rack.
Rarely. A latch that fails to register usually worsens as the strike or the switch wears. We test the switch and adjust or replace the worn part so the cycle starts reliably.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
