KitchenAid KDTE204E Dishwasher Repair
If water appears under a KDTE204E only after the machine drains, the hose is the first suspect. The model has been installed in kitchens for years, and the hose connection at the disposer is exposed to heat and vibration. You may also see KDTE204EPA on the plate.
We follow the drain line from the pump to the disposer inlet or air gap, looking for a loose clamp, a cracked end or a sag that holds dirty water. We also look at scale on the heater and in the spray arms and check the diverter. If the pump hums without moving water, we clear the sump and turn the impeller by hand. The price is given in writing, and the repair carries a 30-day workmanship warranty.
That pattern rarely means a cracked tub. The drain hose or its clamp leaks under the pump's pressure. We inspect both before looking anywhere else.
The diverter or a clogged arm. We test water flow to each arm and run a cycle with the racks in place. We confirm it by running the wash and drain separately, then marking where moisture first shows.
We would not. Water under the unit can damage the floor and cabinet. Stop using it until we have checked the hose connection. Stopping prevents warped flooring and mold in the cabinet below.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
