Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Dishwasher

KUDP02CR

KitchenAid KUDP02CR Dishwasher Repair

Schedule Service(713) 903-2606
KitchenAid dishwasher

Most common issues on this model

  1. Leaking drain connection
  2. Hard-water film on the heating surface that slows drying
  3. Stuck wash diverter
  4. Pump that hums at drain time but leaves water behind

The KUDP02CR is one of the older KitchenAid dishwashers that quietly stay in service for years. By now the clip on the drain hose, the heater surface and the diverter have each seen thousands of cycles.

A leak that appears only during draining is a strong clue to the hose clip, so we watch a drain cycle with the lower panel removed. If the top rack is dull, we examine the diverter and the arm feed. Water left in the tub after the cycle sends us to the pump. Scale is checked on the heater along the way. Where a part is worn, we explain what it does and why it matters before we fit it.

We give the price in writing first, and our repair warranty runs 30 days.

Key features

  • Dishwasher, model KUDP02CR
  • Discontinued model
  • Drain hose, pump and diverter are the main wear points
→Codes

Error codes this model can show

F9E2KitchenAid Dishwasher Code F9E2: drain motor error and clogs FAE4 or F10E4KitchenAid Dishwasher Code FAE4 or F10E4: diverter valve error FAE5 or F10E5KitchenAid Dishwasher Code FAE5 or F10E5: diverter leak, water under the dishwasher Front Status LightsKitchenAid Dishwasher Front Status Light Colors: what blue, red and white mean Front Status Lights Not IlluminatedKitchenAid Dishwasher Front Status Light Not Illuminated: no color during the cycle Glowing RedKitchenAid Dishwasher Sani Rinse Glowing Red: end-of-Cycle sanitize indicator H2OKitchenAid Dishwasher Display H2O: water not detected during fill Sanitize Light FlashingKitchenAid Dishwasher Sanitize Light Flashing: sanitization temperature not met
KUDP02CRKUDP02CR questions
Where do you look when a KUDP02CR leaks only on drain?

At the drain hose and clip. A joint that seeps only under pump pressure is easy to spot with the lower panel off during a test drain cycle.

Why would the top rack of my KUDP02CR stay dirty?

The diverter may not be sending water to the upper arm, or its feed may be blocked. We test the diverter, clean the passages and confirm both arms spray.

My KUDP02CR hums after the cycle. Is the pump failing?

It may be blocked rather than failed. We clear the pump and hose first, then test the motor, and replace the pump only if it still will not move water.

Book a visit

Book repair for your KUDP02CR

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 903-2606
☎ Call the desk ▤ Schedule Service