KitchenAid Built-In Microwave Code F2 E2: keypad circuit reading error

What F2 E2 means

KitchenAid built-in microwaves and combination ovens, including the KMBP100ESS and KOCE500ESS, show F2 E2 when the keypad or user interface, the control, or the associated wiring may be having trouble. Key presses either do nothing or trigger the message. The wording matches F2 E0 and F2 E1, and the technician uses the last digit as a pointer.

Common causes of F2 E2

User interface hardware
Control board input circuit
Panel wiring or ribbon connections

✓ One safe check you can try

1. Press Cancel and wait. 2. Wipe the panel dry. 3. Switch the breaker off for a full minute, then on. 4. Check that the display and clock work. 5. If F2 E2 reappears at once, turn the breaker off and call us.

! Why to stop there

Pinpointing among three suspects requires testing
Avoiding needless parts keeps your repair bill down
A written price comes before the work, and our workmanship warranty lasts 30 days

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

Probe or Insert ProbeKitchenAid Combination Microwave Message "Probe" or "Insert Probe": Seat the meat probe in its jack PUSH or PSHKitchenAid Built-In Microwave Message PUSH or PSH: The oven is waiting for Start Registration ErrorKitchenAid Over-the-Range Microwave Message "Registration Error": Check the home network and try again Sabbath, Sab, 5Ab, or 5A6KitchenAid Built-In Microwave Display Sabbath, Sab, 5Ab or 5A6: Sabbath Mode is on SEKitchenAid Over-the-Range Microwave Code SE: Keypad or user interface problem F4E1KitchenAid Over-the-Range Microwave Code F4E1: Cavity thermistor circuit F9QKitchenAid Over-the-Range Microwave Code F9Q: Reset power and watch for a minute F4E4KitchenAid Over-the-Range Microwave Code F4E4: Humidity thermistor or its wiring

F2 E2F2 E2 questions

What is special about E2 in F2 E2?

It is one of seven related keypad checks. The digit tells the technician which reading the control rejected, which narrows the first tests.

Could kitchen humidity cause F2 E2?

Steam and splashes can leave moisture in a panel connector over time. Keeping the area dry helps, though a unit that already shows the code usually needs inspection.

Do you replace parts the same day?

When the part is on the truck, yes. If it must be ordered, we explain the timing and price before booking the return visit.