Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Wall Oven

KEBS207S

KitchenAid KEBS207S Touch Control Repair After Self-Clean

Schedule Service(713) 903-2606
KitchenAid wall oven

Most common issues on this model

  1. Blank display after a cleaning cycle from an opened thermal fuse or limit switch
  2. Touch membrane that skips presses or registers on its own
  3. Control-area blower that hums, rattles or has stopped
  4. Convection motor that grinds, or one that has stopped, where a convection motor is installed

You may see the KEBS207S, or the KEBS207SSS, mounted in a wall cabinet with a touch panel on the front. That panel is the weak spot of many ovens in this family, and a membrane that is wearing out is often the reason presses are ignored.

Random beeps, numbers jumping, or keys that seem to press themselves are typical of a worn membrane. We test the panel against the control board so you do not pay to replace a board that is working. If the display goes completely dark after a cleaning cycle, a thermal fuse is a likelier cause.

We also listen to the cooling fan behind the panel. A price in writing precedes any work, and a 30-day warranty follows it.

Key features

  • Built-in electric oven
  • Also sold as KEBS207SSS
  • Touch control panel
  • Discontinued legacy model
→Codes

Error codes this model can show

Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin Registration ErrorKitchenAid Wi-Fi Wall Oven Message Registration Error: Check internet connection Sabbath ModeKitchenAid Wall Oven Sabbath Mode: Bake-Only operation explained Sabbath, Sab, 5Ab, or 5A7KitchenAid Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Cancelling the mode Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on
KEBS207SKEBS207S questions
The buttons on my KEBS207S respond slowly. Is the panel dying?

Slow or missed presses usually suggest membrane wear. We test the touch panel and the control board separately, and replace only the part that is failing, so you do not pay for a new board when the membrane is the cause.

Why did my KEBS207S go dark after cleaning?

A thermal fuse or limit device may have opened from the heat. They protect the oven and are inexpensive to replace, so we test them before suspecting the board.

Is it dangerous to use a KEBS207S with a noisy fan?

A noisy cooling fan is a warning that its bearing is wearing. If it stops, the control electronics can overheat. We recommend having it checked soon.

Book a visit

Book repair for your KEBS207S

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 903-2606
☎ Call the desk ▤ Schedule Service