KitchenAid KSRP25FT Refrigerator Service

Water behind the cabinet is the least obvious problem on a KSRP25FT, also sold as KSRP25FTSS. A weeping inlet valve may drip for months before anyone notices a damp patch on the floor, so we pull the cabinet forward and look whenever a water line is connected.
Electrical wear is the other major theme. A start relay that has failed can leave a good compressor dead, and an aged control board may ignore your settings entirely. A fan that whines or rattles inside the freezer is a smaller but common nuisance.
Revision codes such as KSRP25FTSS00 and KSRP25FTSS02 appear on the plate, and we note them for parts matching. We check the valve first, then the relay, then the fan and board, and quote in writing before beginning. A 30-day workmanship warranty follows the repair.
Look for dampness behind the cabinet or a swollen floor edge. We pull the unit out safely, check the inlet valve and tubing, and replace whichever part is weeping before sliding it back.
Often the start relay is the real cause. We test the relay and overload first, since replacing them costs far less, and test the windings to be sure the compressor is healthy.
The evaporator fan is usually the source, especially if the sound changes when the door is held shut. We open the panel, inspect the blade and bearing, and replace the motor if needed.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.