KitchenAid KSSC48FK Refrigerator Service Call
Water in the wrong place is the starting point for many KSSC48FK visits. A drain tube silts up with debris, and the meltwater from the defrost cycle finds another route, usually onto shelves or the floor. We clean the tube, run water through it, and make sure the pan is dry.
A drain that clogs again usually means the evaporator is frosting more than it should, and that leads us into the defrost parts: the heater, the thermostat and the timer. Left alone, those problems pack the coil with frost and the cabinet slowly warms. The ice maker is tested next, since a fill that never ejects can have a separate cause.
A sealed-system problem is something we identify plainly and explain, not repair around. KSSC48FKS on your label is the same model. We give you the price in writing before we start, and our workmanship warranty runs 30 days.
It runs down a drain tube to a pan where it evaporates. When debris silts the tube, the water backs up and escapes inside the cabinet or onto the floor.
Yes. We run a harvest cycle in place and watch the heater, the mold and the ejector. If the bin has frozen solid, we thaw it first and then observe the cycle.
We confirm a refrigerant leak or restriction with measurements, state what a repair involves and its price in writing, and let you decide with the cabinet's condition in mind.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
