KitchenAid KTRA22EL Refrigerator Repair Houston
If a KTRA22EL hums for a second and goes quiet, the compressor is trying to start and giving up. That behavior is the signature of a worn start device, and it is why we begin our visit by listening. The cabinet was sold as KTRA22ELBL, KTRA22ELSS and KTRA22ELWH, with the last letters naming the finish; the cooling parts are the same in all three.
We test the start relay and the overload protector with a meter, then read the compressor windings to be sure the compressor itself is sound. A good compressor with a bad relay is a short repair. Once it is running we check the evaporator fan, the condenser airflow and the control board, in that order, because a cabinet that has been struggling for a while often has more than one problem.
You see the price in writing before any work starts, and we back each repair with a 30-day workmanship warranty.
Not necessarily. A weak start relay or overload protector cuts the compressor off after a second. We test those first and measure the compressor windings, so a compressor is only recommended if the tests require it.
It is a small thermal switch that opens when the compressor draws too much current, protecting the windings. If it trips repeatedly, we look for dirty coils, a weak fan, or a failing relay behind the problem.
Yes, with care. Unplug it, pull it straight forward, and keep the water line from kinking if one is connected. Vacuuming the coil and the fan area once a year helps the compressor run cooler.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
