KitchenAid KGCU462V Cooktop Fix
On a KGCU462V the knobs take the most abuse. They get pushed, twisted and wiped down every day, so the shaft behind each one can wear until the knob turns without moving the control. The stainless KGCU462VSS carries plate codes 00 and 01.
We pull each knob and feel the shaft for play, then run the control through its range. If the control is fine, the knob is the culprit; if not, we go behind it. Zones receive their own test. One that shuts off midway points us to the thermal limiter, and one that stays cold sends us to its connection and heating part.
Induction surfaces are tried with a magnetic pan sized for the zone. Written estimate first, and 30 days of workmanship coverage once the work is done.
The shaft has probably worn smooth, so the knob slips. We test the control without the knob, then replace the worn shaft or knob. The control itself is replaced only if it fails the test.
It often is. A limiter that trips early is a single part. We time the zone, test the limiter and wiring, and replace only the piece that fails.
They show the revision of your KGCU462VSS. Control parts can differ between revisions, so we check the plate before ordering. Reading the plate takes seconds and prevents a wrong-part return trip.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
