KitchenAid KEBS277B Built-In Oven, Element and Hinge Service
This built-in electric oven, labeled KEBS277B and also sold as the KEBS277BSS, is no longer in production. Cabinet installations are typical, and the oven’s cutout dimensions do not change over the years, so a sound KEBS277B is still worth repairing.
An element gives up gradually. A section turns dark or splits, and baking becomes slower and patchier. We examine both elements, then place a thermometer in the cavity and compare it with the setting to decide whether the sensor is still honest.
If the door has dropped or will not unlock after a cleaning cycle, hinges and lock parts are tested next. A written price is yours before the work, and 30 days of warranty follow it. A short note about when the problem began is useful, because it points to the aging part.
Only the one that tests bad. The bake and broil elements wear out independently of each other, so we measure each with a meter and replace just the failed element rather than both.
Within a few degrees of the setting is a reasonable expectation. If a thermometer shows a larger gap, the sensor has probably drifted and should be tested.
Yes. Replacing worn hinges usually brings the door back square, and we adjust the gasket contact afterward so the door closes evenly and the heat stays inside the cavity where it belongs.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
