KitchenAid Wall Oven Code F0 E0: a general control system error

What F0 E0 means

F0 E0 on a KitchenAid electric single, double or combination wall oven, such as the KODE500ESS, means there may be a problem with part of the oven control system, the electronic control, or the associated wiring. It is a broad control-side code rather than a sensor or door one. The display shows F0 E0 and cooking is usually interrupted. The wording is broad, so a technician has to narrow it down by testing.

Common causes of F0 E0

Electronic control failing
A part inside the control system not responding
Damaged wiring to the control

✓ One safe check you can try

1. Press Cancel. 2. Cut power at the oven's breaker for a minute and turn it back on. 3. Reset the clock if prompted and try a brief bake. 4. If F0 E0 returns, switch the breaker off and call us, since the control may be failing and repeated cycles can cause more damage.

! Why to stop there

Control electronics operate at line voltage.
Wiring trouble and board trouble overlap, so a meter is needed.
Wrong replacements add cost without a cure.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Sabbath, Sab, 5Ab, or 5A7KitchenAid Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Cancelling the mode Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message Please Remove and Empty ContainerKitchenAid Steam Oven Prompt Please Remove and Empty Container: End of the drain cycle Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin

F0 E0F0 E0 questions

Is F0 E0 a clock or keypad problem?

It is described as a problem within the oven control system, the electronic control or the wiring. A dead keypad can accompany it, but the code itself is broader. Possibly, since the keypad talks to the control, though the code itself is described in wider terms than a keypad failure.

Will a reset fix it permanently?

Not usually. A reset may clear a one-time glitch, but a recurring code means the control or its wiring should be tested. A reset can clear a one-time glitch. A code that comes back means the control or wiring deserves testing.

How is the repair charged?

We give a written price after diagnosis and before work. A 30-day warranty applies. The price depends on whether the board or a connection is responsible, and we confirm that first.