KitchenAid Wall Oven Code F3 E4: meat probe or power attachment not seated

What F3 E4 means

On KitchenAid electric single, double and combination wall ovens like the KOSE500ESS, F3 E4 can be caused either by a dislocated meat probe or by a power attachment, depending on the model. The first question is whether the probe was in use. If so, make sure it is securely inserted. Some models have a roll-out rack power attachment that can trigger the same code. The probe is the usual suspect, and the power attachment applies only to some models.

Common causes of F3 E4

Meat probe plug not fully inserted
Roll-out rack power attachment not connected on some models
Control still holding the error after a reseat

✓ One safe check you can try

1. Ask whether the probe was in use. If so, remove it and push the plug firmly into its socket. 2. If your oven has a roll-out rack power attachment, check that it is attached. 3. Press Cancel. 4. Switch the breaker off for a minute and restore it. If F3 E4 returns, call us.

! Why to stop there

Probe and power attachment contacts are wired into the control.
Forcing a worn plug can damage the socket.
A returning code needs a test.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message Please Remove and Empty ContainerKitchenAid Steam Oven Prompt Please Remove and Empty Container: End of the drain cycle Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin Registration ErrorKitchenAid Wi-Fi Wall Oven Message Registration Error: Check internet connection Sabbath ModeKitchenAid Wall Oven Sabbath Mode: Bake-Only operation explained

F3 E4F3 E4 questions

Is F3 E4 a heating problem?

No. It relates to the probe or power attachment connection, so the oven's heating is not the concern. It may refuse probe cooking until fixed. Nothing about the oven's heat is involved, though probe and attachment cooking may be unavailable until it is fixed.

What is a power attachment?

Some models have a roll-out rack with a powered connection. If it is not seated, the control may flag it with this code. A loose link on those roll-out racks can raise the same code, so look at how the rack plugs in.

What if the probe is seated and it still shows?

Then the probe, socket or attachment needs testing, which we do with a written price first. Testing and repair are straightforward, and we quote in writing before replacing anything.