KitchenAid Wall Oven Code F3 E5: lower oven temperature sensor, control or wiring

What F3 E5 means

On KitchenAid electric single, double and combination wall ovens such as the KODE500ESS or KOSE500ESS, F3 E5 points to the lower oven temperature sensor, the control, or the wiring that links them. The oven cannot read the lower cavity temperature properly. Owners see the code appear on the display, and the oven may refuse to start or finish a bake cycle until the reading problem is dealt with.

Common causes of F3 E5

Lower oven temperature sensor reading incorrectly
Control that is not receiving the sensor signal
Damaged or loose wiring between the sensor and the control

✓ One safe check you can try

1. Press Cancel and let the oven cool completely. 2. Switch the oven's breaker off for one minute, then on again. 3. Start a short bake and watch whether F3 E5 comes back. 4. If it returns, stop using the lower oven and call us. Do not pull the oven out or open any panel.

! Why to stop there

The sensor, control and wiring all produce the same display, so only testing tells them apart.
Opening the oven means working around hard-wired household power.
We quote in writing before any work, and the repair carries a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Registration ErrorKitchenAid Wi-Fi Wall Oven Message Registration Error: Check internet connection Sabbath ModeKitchenAid Wall Oven Sabbath Mode: Bake-Only operation explained Sabbath, Sab, 5Ab, or 5A7KitchenAid Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Cancelling the mode Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message Please Remove and Empty ContainerKitchenAid Steam Oven Prompt Please Remove and Empty Container: End of the drain cycle Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart

F3 E5F3 E5 questions

What does F3 E5 mean on my wall oven?

The oven is reporting a problem with the lower oven temperature sensor, the control, or the wiring between them. In plain terms, it cannot trust the temperature reading from the lower cavity.

Will a power reset clear it?

A breaker reset sometimes clears a one-time display, so it is worth trying once after the oven has cooled. If F3 E5 returns on the next cycle, the sensor circuit needs a technician's testing.

Can I still use the upper oven?

Do not count on it. The code concerns the lower oven sensor and the control, and the control may block cooking. Cancel the cycle and call us rather than forcing the oven to heat.