KitchenAid Wall Oven Code F6 E0: appears at cycle start, cleared by a power reset

What F6 E0 means

On KitchenAid electric wall ovens such as the KOSE500ESS or KODE500ESS, F6 E0 may appear when you start a cycle. It is cleared with a power reset, after which the oven should be watched to be sure the code does not display again and normal operation is verified. On built-in microwaves, the same code has a different text. Because this code can appear at the start of a cycle and clear with a reset, the key step is watching afterward to see whether it returns.

Common causes of F6 E0

Momentary control reading while a cycle starts
Oven control that needs the power reset to clear

✓ One safe check you can try

1. Press Cancel to clear the display. 2. Cut the oven's power at the breaker for one minute and restore it. 3. Start a cycle again and watch the display for a few minutes. 4. If F6 E0 comes back each time you start, call us.

! Why to stop there

A code that repeats at every start deserves a proper look at the control.
Resetting over and over does not fix a cause.
You get a written price before any work, and repairs carry a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Sabbath ModeKitchenAid Wall Oven Sabbath Mode: Bake-Only operation explained Sabbath, Sab, 5Ab, or 5A7KitchenAid Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Cancelling the mode Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message Please Remove and Empty ContainerKitchenAid Steam Oven Prompt Please Remove and Empty Container: End of the drain cycle Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing

F6 E0F6 E0 questions

Does F6 E0 mean something is broken?

Not always. It can show when you start a cycle and clear with a power reset. The step that matters is watching the oven afterward to confirm the code stays away.

How long should I watch it?

Run the oven through a normal cycle and keep an eye on the display. If the code does not return, normal use is fine, and if it does, book us for a control check.

Is this the same on my built-in microwave?

No. The built-in microwave gives F6 E0 a different text, naming other parts, so this page applies to the wall oven only and the microwave has its own page.