KitchenAid Steam Oven Code F8: reset power, run a cycle, verify

What F8 means

On KitchenAid built-in steam ovens, a plain F8 is handled with a power reset. After the reset, start a cycle and watch the oven for one minute to be sure the code does not display again, then verify normal operation. Wall ovens with a standard control use F8 with a second character instead. Because the guidance is a reset and a short watch, any return of the code is the sign that a technician should test the oven.

Common causes of F8

One-time code that a power reset clears
A cause that returns after the reset and needs testing

✓ One safe check you can try

1. Start by pressing Cancel on the control. 2. Switch the oven's breaker off for one full minute, then back on. 3. Start a cycle and watch the display for a full minute. 4. If F8 comes back, stop using the oven and call us. Do not open any panel.

! Why to stop there

A repeating code needs a test, not another reset.
Steam ovens hold water and hot parts.
You see a written price first, and our repair has a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Sabbath ModeKitchenAid Wall Oven Sabbath Mode: Bake-Only operation explained Sabbath, Sab, 5Ab, or 5A7KitchenAid Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Cancelling the mode Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message Please Remove and Empty ContainerKitchenAid Steam Oven Prompt Please Remove and Empty Container: End of the drain cycle Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing

F8F8 questions

What do I do when F8 appears?

Reset power at the breaker, start a cycle and watch the oven for one minute to see that F8 does not return. Then confirm normal operation before you rely on it.

Is F8 the same as F8 E0?

No. F8 E0 to F8 E5 are for standard wall ovens and name cooling fans and sensors. This page covers the plain F8 on the built-in steam oven.

When is a visit needed?

If F8 returns after the reset, or appears again on later cycles, book us and we will test the oven and quote any repair in writing before we start.