KitchenAid Steam Oven Code F13: reset, start a cycle and watch

What F13 means

F13 turns up on KitchenAid built-in steam ovens, found in the wall oven family, rather than on standard electric wall ovens. The guidance for F13 gives no failed part. It simply says to reset power, start a cycle, monitor the oven for one minute to confirm the code stays away, and verify normal operation. It is therefore a control alert that may clear. The guidance asks for a restart and a test cycle rather than naming a failed part.

Common causes of F13

A passing control error cleared by a power reset
A recurring error the control logs again after a new cycle
A problem that only returns while a steam cycle runs

✓ One safe check you can try

1. Press Cancel and empty the oven. 2. Turn the breaker off for one minute and restore it. 3. Make sure the water container is filled and seated. 4. Start a short steam cycle and watch the display for one minute. If F13 returns, stop using the steam function and call us.

! Why to stop there

No part is named, so the cause must be read from the oven.
Steam parts mix water, heat and electricity in one cabinet.
A repeat F13 after a reset needs a diagnosis.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin Registration ErrorKitchenAid Wi-Fi Wall Oven Message Registration Error: Check internet connection Sabbath ModeKitchenAid Wall Oven Sabbath Mode: Bake-Only operation explained Sabbath, Sab, 5Ab, or 5A7KitchenAid Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Cancelling the mode Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message

F13F13 questions

Is F13 on a standard wall oven too?

Plain F13 appears in the steam oven list. Standard wall ovens use E-suffixed F-codes instead, so F13 normally points to a steam model. Steam ovens keep a separate list. In the standard wall oven table, plain F13 does not appear.

Why start a cycle after the reset?

The control checks itself while running. If the code stays away for a minute into a cycle, it was likely a one-time event. The code is meant to prove itself clear: if it stays away through a cycle, the glitch has probably passed.

What happens if it comes back?

We diagnose, quote in writing, and repair with a 30-day warranty. If the reset does not hold, we diagnose the steam oven's control and sensors and give you the price in writing.