KitchenAid induction cooktops, for example the KCIG550JSS, show F58 when there may be a problem with the Cooktop Power Control Board or the wiring around it. The board is what energizes the induction coils. Owners find…
KitchenAid induction cooktops, for example the KCIG550JSS, show F58 when there may be a problem with the Cooktop Power Control Board or the wiring around it. The board is what energizes the induction coils. Owners find zones that will not warm, or a cooktop that cuts out, with F58 on the display. The board runs the power side, so no heat is the usual result, and wiping or cookware changes will not help at all.
1. Switch all zones off. 2. Turn the cooktop breaker off for a minute and back on. 3. Check the display and try a single zone with an induction pan. 4. Book a visit if F58 appears a second time, and leave the cooktop idle until then.
They all name the power control board and its wiring. Each number marks a different internal check, so we use them as a starting clue and then confirm with testing.
Leave the cooktop off at the breaker if you will not be using it. Cook on another appliance until it is checked, rather than resetting again and again.
No. The code concerns the cooktop's electronics, not the cookware. Your pans are fine, though they will not heat until the cooktop is repaired. It also does not harm food, because a zone that is not heating never gets hot.
A technician diagnoses it on site and gives you the price in writing before any work starts.