KitchenAid Wall Oven Code 1d21: Sensor circuit check

What 1d21 means

A KitchenAid wall oven or combination wall oven displaying 1d21 may have a problem with the oven temperature sensor, the control, or the wiring. This is the second pair in the 1d family. Owners notice that the oven will not preheat or stops shortly after starting, with the code taking over the display. Preheating may stop partway. Food is simply left unheated.

Common causes of 1d21

Oven temperature sensor out of range
Control that cannot interpret the sensor signal
Damaged or loose wiring on the sensor circuit

✓ One safe check you can try

1. Press Cancel and leave the oven door closed. 2. Switch the breaker off for a minute and back on. 3. Set a low bake and see whether 1d21 appears again. 4. If it does, stop using the oven and call us.

! Why to stop there

The sensor lives in a hot, tight space inside the oven.
Testing the circuit needs a meter and the right procedure.
Our price is written before any work.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin Registration ErrorKitchenAid Wi-Fi Wall Oven Message Registration Error: Check internet connection Sabbath ModeKitchenAid Wall Oven Sabbath Mode: Bake-Only operation explained Sabbath, Sab, 5Ab, or 5A7KitchenAid Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Cancelling the mode Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on

1d211d21 questions

Why would the oven stop right after starting?

The control checks the sensor as the oven begins heating. If the reading is wrong, it shuts down and shows the code. The control checks the sensor as heating begins. A wrong reading ends the heating cycle and puts the code on screen.

Can a cleaning cycle trigger 1d21?

High cavity heat stresses sensors and wiring. If the code first appeared after a cleaning cycle, tell us when you book. High heat stresses sensors and wiring. Mention the timing when you book, because it narrows the search.

What does the visit include?

We read the code, test the sensor, check the wiring and the control, and give a written quote. We read the code, test the sensor, check the wiring and the control, and give a written quote at the end.