KitchenAid Oven Clock Is Blank: Restoring the time of day display

What Clock is blank means

On KitchenAid wall ovens and ranges covered by the general cooking code chart, a blank clock usually means the display is set to hide the time of day. Some models allow this. The oven is working; the time is simply not shown. Pressing and holding Clock Set/Start for about five seconds brings the time of day back, and the time does not need to be reset afterward.

Common causes of Clock is blank

Time-of-day display switched off on a model that allows it
Clock Set/Start held during another adjustment
Settings changed after cleaning the keypad

✓ One safe check you can try

1. Confirm the oven otherwise responds, such as the keypad lighting or beeping. 2. Press and hold Clock Set/Start for about five seconds. 3. Watch for the time of day to reappear; you do not need to set it again. 4. If nothing appears, switch the breaker off for a minute and restore it. 5. If the display stays blank after power returns, stop and call us.

! Why to stop there

A blank screen that stays blank after a five-second hold and a breaker reset points to the display or control.
Those parts sit behind panels that owners should not open.
We give a written price before we start and a 30-day workmanship warranty after.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message Please Remove and Empty ContainerKitchenAid Steam Oven Prompt Please Remove and Empty Container: End of the drain cycle Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin Registration ErrorKitchenAid Wi-Fi Wall Oven Message Registration Error: Check internet connection Sabbath ModeKitchenAid Wall Oven Sabbath Mode: Bake-Only operation explained

Clock is blankClock is blank questions

Will I lose my time setting when I bring the clock back?

No. Holding Clock Set/Start for about five seconds simply shows the time of day again. The time does not need to be reset, because the oven was keeping it all along.

Do all KitchenAid ovens let me hide the clock?

Only some models can hide the time of day. If yours is one of them, the five-second press of Clock Set/Start toggles it back, which explains most blank clocks.

What if the entire display is dark?

A fully dark display is different from a hidden clock. Check the breaker and try the hold once more. If nothing lights, call us; a dead display needs control diagnosis and a written quote.