KitchenAid Wall Oven Code F2 E5: interface and control communication

What F2 E5 means

On KitchenAid electric single, double and combination wall ovens like the KOSE500ESS, F2 E5 says the user interface or keypad, the control, or the associated wiring may have a problem. The two ends of the control conversation are not talking properly. You might see the code along with a blank or flickering display. Between flickers the screen itself may look fine.

Common causes of F2 E5

Interface board failing
Control board not responding to the interface
Communication wiring loose

✓ One safe check you can try

1. Press Cancel. 2. Switch off the oven's breaker for one minute, then back on. 3. Look at whether the display lights evenly. 4. Try setting a timer. If F2 E5 returns or the display flickers, leave the oven off and call.

! Why to stop there

A flickering display suggests wiring or board trouble.
Both boards have to be tested.
Opening the oven front is not safe for owners.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message Please Remove and Empty ContainerKitchenAid Steam Oven Prompt Please Remove and Empty Container: End of the drain cycle Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin Registration ErrorKitchenAid Wi-Fi Wall Oven Message Registration Error: Check internet connection Sabbath ModeKitchenAid Wall Oven Sabbath Mode: Bake-Only operation explained

F2 E5F2 E5 questions

Why is the display flickering?

Poor contact between the interface and control can cause it. The published meaning includes wiring for that reason. Poor contact between boards makes the picture flicker, and that is why the wiring is named in the published meaning.

Do I need a new control and interface?

Often one of the two is enough. We test both and tell you which in writing. Sometimes only one of the two does the job, and our tests tell us which before we quote.

Can you fix it in one visit?

Usually, if the part is on the truck. We order it if not. Typically one visit covers it when the right board is available, otherwise we return once it arrives.