KitchenAid Wall Oven Code F3 E6: the lower sensor circuit needs testing

What F3 E6 means

Owners of KitchenAid electric double and combination wall ovens, for example the KODE500ESS or KOCE500ESS, may see F3 E6 on the control. It signals a possible problem with the lower oven temperature sensor, the oven control, or the wiring connected to them. The display shows the code, and the oven can stop heating or ignore a cycle you just set.

Common causes of F3 E6

Lower oven temperature sensor that has drifted or opened
Oven control failing to process the sensor reading
Wiring or connector between sensor and control that is damaged

✓ One safe check you can try

1. Clear the display with Cancel and give the oven time to cool. 2. Turn the oven breaker off, wait about a minute, and turn it back on. 3. Run a brief bake at a normal temperature. 4. If F3 E6 appears again, leave the oven off and call us. Never unplug sensors or remove the oven.

! Why to stop there

Sensor trouble and control trouble look identical from the front, so guessing means paying for the wrong part.
Wall ovens are hard-wired, which makes panel removal unsafe for owners.
You get a written price first, and our work is covered by a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin Registration ErrorKitchenAid Wi-Fi Wall Oven Message Registration Error: Check internet connection Sabbath ModeKitchenAid Wall Oven Sabbath Mode: Bake-Only operation explained Sabbath, Sab, 5Ab, or 5A7KitchenAid Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Cancelling the mode Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message

F3 E6F3 E6 questions

Is F3 E6 different from F3 E5?

The meaning given for both is the same: lower oven temperature sensor, control or wiring. The second character simply identifies the particular entry the oven logged, so we treat both as a sensor circuit to test.

Why did it appear mid-cycle?

The oven checks its sensor continuously while heating. If the reading drops out or looks impossible, it posts the code and may end the cycle to protect the cooking cavity.

Should I replace the sensor myself?

No. The sensor sits inside the cavity wiring of a hard-wired oven, and the control or a loose connector could be the real source. We test the circuit first and quote before any part is ordered.