KitchenAid Steam Oven Code F7 E1: water boiler temperature sensor

What F7 E1 means

Steam-capable KitchenAid wall ovens use F7 E1 for a possible problem with the water boiler temperature sensor, or its wiring. This code is part of the steam system and does not apply to every wall oven. You will see it on the display, and steam functions may not start. Because the boiler and its sensor are named, avoid steam cycles until the oven has been tested, and do not open the oven body.

Common causes of F7 E1

Water boiler temperature sensor failing
Wiring problem at that sensor

✓ One safe check you can try

1. Cancel the steam cycle and let the oven cool completely. 2. Turn the breaker off for one minute and on again. 3. Try a short steam cycle and watch the display. 4. If F7 E1 returns, stop using steam and call us. Do not open any panel.

! Why to stop there

The boiler is hot and wet and not for owner repair.
The sensor and its wiring give the same code.
You see a written price first, and the repair has a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Sabbath, Sab, 5Ab, or 5A7KitchenAid Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Cancelling the mode Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message Please Remove and Empty ContainerKitchenAid Steam Oven Prompt Please Remove and Empty Container: End of the drain cycle Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin

F7 E1F7 E1 questions

What is the water boiler temperature sensor?

It tracks the temperature of the oven's water boiler. F7 E1 means that sensor or its wiring may have a problem, so the oven cannot judge boiler heat for steam cooking.

Is it safe to use the oven normally?

Avoid steam until it is tested. Use other modes only if the oven allows them and shows no code, and stop if the code appears during a cycle.

How will you test it?

We check the sensor circuit and its connection, explain what we found in plain words, and quote the repair in writing before any part is replaced.