KitchenAid Wi-Fi Oven Code FC E2: weak signal or router trouble

What FC E2 means

A Wi-Fi connected KitchenAid wall oven, for instance the KOCE900HSS, may display FC E2 when the Wi-Fi module cannot hold its link. The causes listed are a connection time out, poor signal strength, a failed router, the Wi-Fi module in the appliance, or the associated wiring. The oven is otherwise a separate matter. Because several causes are named, checking your router and the signal strength near the oven comes before any suspicion of the oven's own module.

Common causes of FC E2

Connection time out
Weak signal reaching the oven
Router that has failed
Wi-Fi module or wiring in the oven

✓ One safe check you can try

1. Press Cancel to clear the message. 2. Restart your router by switching it off for a minute, then on. 3. Reset the oven at the breaker for one minute. 4. Wait a few minutes for the oven to reconnect. If FC E2 keeps returning, call us.

! Why to stop there

It can be your network rather than the oven.
The module and wiring are inside the appliance.
We quote in writing first and cover our work for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin Registration ErrorKitchenAid Wi-Fi Wall Oven Message Registration Error: Check internet connection Sabbath ModeKitchenAid Wall Oven Sabbath Mode: Bake-Only operation explained Sabbath, Sab, 5Ab, or 5A7KitchenAid Wall Oven Display Sabbath, Sab, 5Ab or 5A7: Cancelling the mode Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message Please Remove and Empty ContainerKitchenAid Steam Oven Prompt Please Remove and Empty Container: End of the drain cycle

FC E2FC E2 questions

Is FC E2 different from FC E1?

The listed causes are the same: time out, weak signal, failed router, the oven's Wi-Fi module or its wiring. We check the router and signal first and then the oven's module.

Should I move my router?

If signal is weak at the oven, a closer position or a signal extender can help. It is a free test before assuming the oven's module has a problem.

Can the oven still bake?

Wi-Fi codes concern the connection, not heating, so baking may continue. If other codes appear alongside FC E2, stop and call us so the oven is checked.