KitchenAid Wi-Fi Oven Code FC E7: the oven did not reach your router

What FC E7 means

On Wi-Fi connected KitchenAid wall ovens such as the KOCE900HSS, FC E7 means the appliance did not connect to your router. The recommended steps are a power reset, starting a cycle, and watching the oven for one minute to confirm the code does not display again, then verifying operation. You may also need to set up the Wi-Fi connection again.

Common causes of FC E7

Oven not connecting to the router
Wi-Fi connection that needs to be set up again

✓ One safe check you can try

1. Press Cancel and reset the oven at the breaker for a minute. 2. Start a cycle and watch the display for one minute. 3. Check that your router is on, then set up the oven's Wi-Fi connection again. 4. If FC E7 persists, call us.

! Why to stop there

It may be a simple network setting.
If setup fails, the module may need testing.
You get a written price first, and our repair has a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message Please Remove and Empty ContainerKitchenAid Steam Oven Prompt Please Remove and Empty Container: End of the drain cycle Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin Registration ErrorKitchenAid Wi-Fi Wall Oven Message Registration Error: Check internet connection

FC E7FC E7 questions

What does FC E7 mean?

The oven did not connect to your router. It is a connection message, so the first checks are your router, its signal at the oven, and the oven's Wi-Fi setup.

What is the first step?

Reset power at the breaker, start a cycle, and watch the oven for one minute to see that the code does not return. Then set up the Wi-Fi connection again.

When do I need you?

If setup fails and the code keeps returning after resets, the Wi-Fi hardware may need testing. Book a visit, and we will quote any repair in writing first.