KitchenAid KBSD708M Water Dispenser Service
Water dispensing sets the KBSD708M apart from a plain side-by-side. When the stream slows or stops, we follow the line from the shutoff to the filter housing, the valve, and the tubing into the door, because any of them can restrict flow. A frozen line is just as likely as a worn valve. The model is also sold as KBSD708MBS, KBSD708MPS and KBSD708MSS.
This 48-inch built-in holds 29.4 cubic feet, and its freezer evaporator feeds both sides. If the refrigerator side warms, we look for frost on the coil and test the fan. Because water lines run through the cabinet, any dampness around fittings gets traced before it reaches the floor.
We give you a written price before the work starts, and repairs come with a 30-day workmanship warranty.
A clogged filter is a reasonable first step and costs little to rule out. If the flow stays weak, we test the valve and check for a frozen or kinked tube in the door.
The cause is often a loose fitting on the water line or a blocked defrost drain. We dry the area, run the dispenser, and watch each connection to find the exact spot.
Unlikely. Warmth in a side-by-side usually comes from frost on the evaporator or a slow fan. We open the freezer panel and check both, since the water system does not control temperature.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
