Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Wall Oven

KODE500E

KitchenAid KODE500E 30-Inch Double Wall Oven Service with Probe Testing

Schedule Service(713) 903-2606
KitchenAid wall oven

Most common issues on this model

  1. Door lock that fails to release after a self-clean cycle
  2. Temperature sensor trouble affecting bake accuracy
  3. Glass-touch display that does not respond
  4. Convection fan motor failure in either oven

Ten cubic feet of total capacity is spread over two cavities in the KODE500E, a 30-inch double electric wall oven with Even-Heat True Convection in both. A temperature probe, a glass-touch display with a control lock and self-cleaning round out the list. It is a current-generation model, sold as KODE500ESS, KODE500EBL, KODE500EBS and KODE500EWH.

With two convection fans and two sensors, a problem in one cavity can hide behind a perfect other one. We bake-test each oven separately, test the fans, and compare the cavity temperature to the setting.

The glass-touch display and the lock are tested after that. You get a written price first, and the repair is warranted for 30 days. Tell us which of the two ovens misbehaves and we will start there, then check the other for comparison.

Key features

  • Double electric wall oven, 30 inches wide
  • Total oven capacity of 10 cu. ft.
  • Even-Heat True Convection serves both cavities
  • Temperature probe and glass-touch display, with a control lock
  • Self-cleaning cycle; FIT system installation; KODE500ESS, KODE500EBL, KODE500EBS and KODE500EWH also sold
→Codes

Error codes this model can show

Temperature Reached Insert FoodKitchenAid Steam Oven Message Temperature Reached Insert Food: Preheat complete Locked, Lock or LocKitchenAid Wall Oven Message "Locked": the lock feature is on PF / PF id=27 / PF id=30KitchenAid Oven Display PF, PF id=27 and PF id=30: Power failure message Please Remove and Empty ContainerKitchenAid Steam Oven Prompt Please Remove and Empty Container: End of the drain cycle Press Cancel to ResetKitchenAid Wall Oven Message "Press Cancel to Reset": clear the error, then restart Probe or Insert ProbeKitchenAid Wall Oven Code Probe or Insert Probe: Meat probe input missing PUSH or PSHKitchenAid Wall Oven Message PUSH or PSH: Press start to begin Registration ErrorKitchenAid Wi-Fi Wall Oven Message Registration Error: Check internet connection
KODE500EKODE500E questions
Which finishes does the KODE500E come in?

The numbers KODE500ESS, KODE500EBL, KODE500EBS and KODE500EWH are finish versions of the same oven. Internal parts are shared, and we match trim pieces to your plate.

My KODE500E upper oven fan runs but the cooking is uneven. What do you check?

We test the sensor and the elements in that cavity along with the fan. Uneven results usually trace to one of those, and the lower oven is a useful comparison.

Why would the control lock on a KODE500E display not turn off?

The glass-touch panel may not be registering the press. We test the panel and the board to see if a replacement of the touch surface is needed.

Book a visit

Book repair for your KODE500E

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 903-2606
☎ Call the desk ▤ Schedule Service