KitchenAid KSC23C8EYY Refrigerator Repair
A fan that will not start from cold is the finding we expect on a KSC23C8EYY once the bearings begin to wear. This discontinued KitchenAid refrigerator can run for years on a tired evaporator fan, and then one cold morning it fails to turn and the cabinet warms.
We spin the fan by hand and test the motor, then move to the other airflow problems. Condenser coils choked with dust and pet hair make the compressor run longer and hotter, so we clean them and look at the fan behind them. Sagging doors and worn hinge cams are the third area, because they stop the seal meeting the cabinet squarely. Finally we clear the drain at the back of the freezer floor, a routine job that is not a sealed-system repair.
You see a written price beforehand, and we cover the work with a 30-day workmanship warranty.
A worn bearing can bind until a nudge frees it. The fan may stall again later and let the cabinet warm. We test the motor under load and replace it rather than waiting for it to fail.
Yes. Coils coated in dust and pet hair cannot release heat, so the compressor runs longer at a higher temperature. Cleaning the coils and fan area is often the cheapest fix for weak cooling.
Worn hinge cams are the likely cause, and replacing them lifts the door back to square. We then check the gasket contact all around and level the cabinet so the door closes without help.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
