KitchenAid KSCS25IN Refrigerator Repair and Ice Care
Frost behind the freezer back panel is the sign we look for first on a KSCS25IN, a discontinued KitchenAid refrigerator that is also sold as the KSCS25INBL, KSCS25INBT and KSCS25INSS. When the defrost cycle has stopped running, ice builds there until airflow chokes, and the whole cabinet warms.
After clearing the frost, we test the heater, thermostat and timing so the problem does not return. Ice that has tailed off is traced through the fill valve, a fill tube frozen shut, and the module. A lamp that stays lit with the door shut, or a door switch that fails, is the quickest check of all. Broken crisper runners and door bin lugs are cosmetic, but worth sourcing while parts last.
Our quote is in writing before we begin, and the 30-day workmanship warranty applies to everything we install.
The defrost system is probably not melting the evaporator. We check the heater, the thermostat and the control, remove the frost, and run a test cycle to prove the fix before leaving.
We follow the water: supply, fill valve, fill tube, then the module. A fill tube frozen shut is common and easily cleared. The module is tested last, so you only pay to replace it if it fails.
Sometimes a runner can be re-seated, but a broken one is normally replaced. We check availability by model number first. Because the model is discontinued, we suggest ordering early.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
