KitchenAid KSRJ25IM Refrigerator Service
The KSRJ25IM, also offered as KSRJ25IMST, is a discontinued refrigerator that often reaches us with a vague complaint: the cabinet never seems to settle. A temperature sensor that has drifted over the years sends the wrong information to the control, so the compressor starts and stops at the wrong moments.
We then look at the compressor start relay and overload, which show themselves as a click every few minutes with no cooling after it. On cabinets connected to water, the valve, the line and the filter housing are the other places to check for leaks.
If the control no longer answers the panel, we verify the board and connections before suggesting a replacement. Everything is explained and priced in writing before we begin, and our 30-day workmanship warranty protects the repair.
Not yet. A drifted sensor is a cheaper and likelier cause. We compare its reading against a thermometer and test the board only if the sensor proves accurate.
A click every few minutes usually means the relay and overload are cycling without starting the compressor. We test both parts and the windings, and replace the one that has failed.
Yes, if the cabinet has one. We look at the valve, tubing and filter housing for damp spots, replace any weeping part, and run the dispenser to confirm everything is dry behind the cabinet.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
