Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Refrigerator

KSRS25FG

KitchenAid KSRS25FG Refrigerator Repair

KitchenAid refrigerator

Most common issues on this model

  1. Ice maker that stops at the fill or the release stage, on cabinets with one installed
  2. Dead interior lamp or a door switch that no longer reports a closed door
  3. Broken shelves and bins that are worth ordering early on a discontinued cabinet
  4. Stiff, aging gasket that no longer draws the door shut

The plate on a KSRS25FG may show a code such as KSRS25FGSS11, KSRS25FGSS13, KSRS25FGSS14 or KSRS25FGSS15, and the cabinet is also sold as KSRS25FGWH. We note which revision you have, since it decides which ice maker parts and shelves will fit.

Ice is the most frequent subject of our calls. A tray that stops filling, or cubes that never release, can come from the fill path, the ejector or the freezer temperature. The lamp and door switch are next, followed by cracked shelves and a gasket that has gone hard with age.

For a discontinued model like this one, we recommend sourcing shelves while they can be found. During the visit we run the ice maker through a full cycle, test the switch and check the seals. We give you a written price first, with a 30-day workmanship warranty on the repair.

Key features

  • Refrigerator
  • No longer manufactured
  • Also listed as KSRS25FGSS, KSRS25FGWH
  • Revision stamps recorded: KSRS25FGSS11, KSRS25FGSS13, KSRS25FGSS14, KSRS25FGSS15
→Codes

Error codes this model can show

KSRS25FGKSRS25FG questions
Does the revision code matter on a KSRS25FG?

Yes, because parts such as ice maker parts can differ between revisions. Reading the code from your rating plate lets us bring the right part rather than guess at the first visit.

My KSRS25FG ice maker stopped filling the tray. What do you check?

We start with the water supply and the fill valve, then look for a frozen fill tube. If water reaches the tray area but nothing happens, we test the ice maker module.

Can I replace a broken bin in my KSRS25FG myself?

Snap-in bins are simple to swap, but the matching part is the hard bit for a discontinued model. We can check availability and supply the correct bin by your full model number.

Book a visit

Book repair for your KSRS25FG

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Schedule Service