KitchenAid KBFN536S French Door Bottom-Mount Repair
A KBFN536S combines two French doors above and a freezer drawer below in a 36-inch built-in cabinet. The doors meet in the middle, and that center seam is where we often find trouble: a gasket edge that has curled, or a door that no longer lines up after years of use. We check alignment and seal contact before looking at cooling parts. Other finishes carry the numbers KBFN536SBE, KBFN536SJP, KBFN536SPA and KBFN536SPS.
Behind the platinum interior, the evaporator fan and the defrost system keep 20.8 cubic feet cool. A drawer that frosts over or a fresh food section that warms while the freezer stays cold sends us to the fan, the air duct and the defrost heater in turn.
Our work begins with a written price, and every repair carries a 30-day workmanship warranty.
It can. A gap at the center seam lets warm air in, and the cabinet runs longer. We adjust the doors, check the gaskets, and replace a seal that has lost its shape.
Frost usually means the defrost cycle is not completing or humid air is entering past the drawer seal. We test the heater, sensor and control, and inspect the seal contact along the drawer front.
Yes. The versions sold as KBFN536SBE, KBFN536SJP, KBFN536SPA and KBFN536SPS share the same layout, so the checks we make and the parts we test are the same for each one of them.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
