Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Refrigerator

KRFC804G

KitchenAid KRFC804G Smart Refrigerator Repair

KitchenAid refrigerator

Most common issues on this model

  1. Connected controls that drop offline or ignore commands
  2. Door-within-door panel that sticks or does not seal
  3. Cooling drift in the fresh food section, traced to the fan or defrost parts
  4. Water or ice leaks from the dispenser path or drain

The KRFC804G is a Smart series refrigerator, 36 inches wide and counter-depth, with 23.5 cubic feet and a FreshVue door within door. The smaller inner door opens often, so its gasket and latch take most of the wear. We check that it closes flat and that the outer door seal is not compensating for a leak. The numbers KRFC804GBS, KRFC804GPS and KRFC804GSS all describe this refrigerator.

The connected controls add a layer: a display that freezes or a cabinet that drops its network can come from the control board, a connector or a simple power reset. We test the board and wiring before suspecting the refrigeration system.

Cooling issues get the usual look at the evaporator fan, defrost parts and condenser. A written price comes first, and the repair carries our 30-day workmanship warranty.

Key features

  • 36-inch smart counter depth French door refrigerator
  • 23.5 cu. ft. capacity
  • FreshVue door within door
  • PrintShield finish
  • Variants: KRFC804GBS, KRFC804GPS, KRFC804GSS
→Codes

Error codes this model can show

KRFC804GKRFC804G questions
The door within the door on my KRFC804G does not seal. What do you check?

We inspect the inner door gasket, the latch and the hinge alignment. A seal that has lost shape or a latch that no longer catches is the usual cause.

My KRFC804G controls freeze or go blank. Do I need a new board?

Not always. We test power and connectors at the board first, since a loose plug or a voltage issue can mimic a failed board. We replace the board only when it tests bad.

Is the PrintShield finish on a KRFC804G affected by repair work?

No. We protect the doors while working and use no harsh cleaners. The finish has no effect on how we diagnose or repair the cooling and water systems.

Book a visit

Book repair for your KRFC804G

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Schedule Service