KitchenAid KBLS20EV Refrigerator Repair Guide
Water where it does not belong is the usual reason owners call about a KBLS20EV. A drain tube that has silted up sends meltwater into the crisper area or onto the floor, and clearing it properly means reaching both ends of the tube, not just poking at the top.
This refrigerator, also sold as the KBLS20EVMS, can also build frost on the evaporator when the defrost heater, thermostat or timer stops working. We take the rear panel off, see how thick the ice is, and test each defrost part until we find the culprit.
An ice maker that fills but does not eject is a separate check of the heater and ejector. And if every other test passes but cooling is still poor, we look at the sealed system and describe what we find honestly. Written price first, and a 30-day workmanship warranty.
We flush the tube with warm water from the freezer side and clear debris from the outlet at the pan end. Then we pour a measured amount through and watch it drain, to confirm the line is open.
A thin frost can be normal, but thick ice means defrost is not working. We test the heater, thermostat and timer, then melt the buildup and confirm the cycle clears frost on its own.
Yes. After airflow, defrost and starting parts check out, we test the circuit itself. If it has lost charge or has a restriction, we explain what that involves and let you decide.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
