KitchenAid KBLA22KM Refrigerator Service Call
A KBLA22KM with ice creeping behind the freezer back panel is telling us the defrost cycle has stopped. We open the panel, look at the evaporator, and test the heater, thermostat and control that drive the cycle, then clear the frost so air moves again.
Some plates read KBLA22KMSS instead. Water pooling inside the cabinet or under it is often much simpler: a drain at the back of the freezer floor that has blocked with debris. We flush it and make sure meltwater reaches the pan.
If your cabinet makes less ice than it used to, the fill valve or a frozen fill tube is the usual cause. And if the cooling circuit itself has lost refrigerant, we say so directly and discuss whether repair suits this age of cabinet. Written price first; 30-day workmanship warranty on the work we do.
That usually means the defrost system has stopped doing its job, so ice accumulates until air cannot move. We test the heater, thermostat and control, remove the buildup, and confirm the cycle runs again.
We look at the water fill valve, the fill tube for freezing, and the ice maker module. A tube frozen shut or a valve passing little water explains most cases, and each is quick to test.
Not automatically, but it is the repair we weigh most carefully against the age of the cabinet. We confirm it with testing, explain your options in plain terms, and never go ahead without your agreement.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
