Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Refrigerator

KTRC22KK

KitchenAid KTRC22KK Refrigerator Repair

KitchenAid refrigerator

Most common issues on this model

  1. Seepage at the valve, line or filter housing on units hooked to water
  2. A relay and overload pair clicking without a cooling cycle following
  3. A control that powers up but no longer obeys the panel
  4. Evaporator fan bearings that wear until the fan will not turn from cold

The KTRC22KK has a water connection in many installs, so we begin with the plumbing: the valve, the tubing behind the cabinet and the filter housing. A seep at any of them is slow and quiet. This refrigerator was sold as KTRC22KKBL, KTRC22KKSS and KTRC22KKWH, and rating plates show codes such as KTRC22KKBL00 and KTRC22KKBL03.

When water is not the issue and the cabinet clicks without cooling, the start relay and overload are next on the list. We test them with a meter and follow with the compressor windings. If the electronic control no longer answers the panel, or the evaporator fan will not start from cold, we find that out before ordering anything.

Parts for a discontinued model are sourced against your exact plate number, and you see the price in writing before any work starts. Our repairs carry a 30-day workmanship warranty.

Key features

  • Refrigerator model KTRC22KK
  • Variants KTRC22KKBL, KTRC22KKSS, KTRC22KKWH
  • Plate revisions: KTRC22KKBL00, KTRC22KKBL03
  • Discontinued model
→Codes

Error codes this model can show

KTRC22KKKTRC22KK questions
Where do water leaks usually start on a KTRC22KK?

Most begin at the inlet valve, a tube fitting, or the filter housing. They are slow and can hide behind the cabinet. We inspect each connection and replace the part that is weeping.

My KTRC22KK panel lights up but nothing cools. What do you check?

We test whether the compressor and fans receive power, then check the start relay and overload. If power reaches them and they still do not run, we examine the control board and its sensors.

Why does my KTRC22KK fan start only after I tap the cabinet?

Worn bearings in the evaporator fan motor are sticking when cold. A tap frees them briefly. The motor will fail completely sooner or later, so we recommend replacing it now.

Book a visit

Book repair for your KTRC22KK

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Schedule Service