Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Refrigerator

KSBS25IN

KitchenAid KSBS25IN Refrigerator Repair Visit

KitchenAid refrigerator

Most common issues on this model

  1. Dusty, pet-hair-covered condenser coils making the compressor run hot and long
  2. Sagging doors and worn hinge cams that stop the gasket from landing squarely
  3. Clogged drain at the freezer floor, usually cleared in one visit
  4. A leak or blockage in the sealed system, the finding that sets the repair decision

Dust and pet hair do more damage to a KSBS25IN than most people realize. The condenser coils of this older KitchenAid refrigerator, also sold as the KSBS25INBL and KSBS25INSS, clog slowly, and the compressor runs longer and hotter to compensate until something gives.

That is why we begin at the machine compartment with a coil cleaning and a look at the fan. The doors come next: sagging doors and worn hinge cams stop the seal from meeting the cabinet squarely, which no gasket can fix. We then clear the drain at the back of the freezer floor, which is a routine job and not a sealed-system repair, and if cooling is still poor we test for a refrigerant leak or restriction, weighing any repair carefully against the value of the cabinet.

The price is in writing before work, and every repair is covered by a 30-day workmanship warranty.

Key features

  • KitchenAid refrigerator, base model KSBS25IN
  • Rating plate may read KSBS25INBL and KSBS25INSS
  • Discontinued model
→Codes

Error codes this model can show

KSBS25INKSBS25IN questions
How often should the condenser coils on a KSBS25IN be cleaned?

In a home with pets or heavy dust, once a year is sensible. We clean the coils and the fan area during any visit for cooling trouble, because a clogged coil can imitate a much bigger problem.

My KSBS25INSS door hangs low and the seal gaps. What fixes it?

Worn hinge cams let the door drop and tilt. We replace the cams, adjust the door height and confirm the gasket touches evenly all the way around, using a paper strip test at several points.

Why does my KSBS25IN leak water inside the freezer?

Meltwater leaves through a drain at the back of the freezer floor. When that drain blocks, water pools and freezes. We clear it, check the defrost heater beside it, and run a defrost cycle to prove it flows.

Book a visit

Book repair for your KSBS25IN

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Schedule Service