KitchenAid KSRG22FT Refrigerator Repair
The KSRG22FT is a discontinued refrigerator that is also sold as KSRG22FTSS, and its rating plate may carry a revision code like KSRG22FTSS00 or KSRG22FTSS02. We use that code to match parts when a repair needs one.
Condensation along the door frame and a compressor that almost never rests usually mean the gasket has perished. Meanwhile a control or thermistor that reads wrongly can warm the cabinet or ice up lettuce on the top shelf. A slow drip from the inlet valve is easy to miss because the water collects behind the cabinet.
When we visit, we pull the cabinet forward a little to look behind it, test the thermistor against a thermometer, and check every gasket edge. Crisper runners and bin lugs that have snapped are worth replacing while parts exist. You get a written price first, and a 30-day workmanship warranty follows.
Not usually. A worn door gasket lets warm air in, so the compressor runs to compensate. We test the seals, check the thermistor, and look at condenser airflow to find which one is causing the constant run.
A drifting cold control or thermistor can overcool the upper shelf. We compare its reading with a thermometer, replace the sensor if it is off, and check the damper that regulates airflow.
A slow drip behind the cabinet can soak flooring over time. We pull the unit out, inspect the valve and connections, replace the leaking part, and dry the area to avoid further damage.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
