Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Refrigerator

KSRP22FT

KitchenAid KSRP22FT Refrigerator Repair

KitchenAid refrigerator

Most common issues on this model

  1. Worn start relay that keeps a healthy compressor from running at all
  2. Aging control board that disregards the temperature you choose
  3. Evaporator fan with a rising whine or a rattle that changes as the door is held shut
  4. Condenser fan that drags, noticeable first as weak cooling on hot days

When a KSRP22FT goes completely silent, owners often assume the compressor has died. In our experience the start relay is the more frequent culprit, and it stops a healthy compressor just as completely. That is why we test the relay and overload before talking about anything larger.

The KSRP22FT, also sold as KSRP22FTSS, is a discontinued refrigerator, and an aging control board can make it ignore the temperature you set. Two fans share the cooling job: the evaporator fan inside the freezer and the condenser fan below. A whine, a rattle or a hot afternoon with poor cooling usually points to one of them.

Revision codes like KSRP22FTSS00 and KSRP22FTSS01 appear on the plate and help us match boards and motors. You get a written price first, and a 30-day workmanship warranty covers the repair.

Key features

  • Refrigerator
  • Out-of-production model
  • Also listed as KSRP22FTSS
  • Plate codes: KSRP22FTSS00, KSRP22FTSS01
→Codes

Error codes this model can show

KSRP22FTKSRP22FT questions
My KSRP22FT is completely silent and warm. Is the compressor finished?

Not necessarily. A failed start relay stops a sound compressor from starting. We test the relay, the overload and the windings, and quote the smaller repair when the compressor proves healthy.

How can I tell which fan is noisy in my KSRP22FT?

A rattle that changes when the door is held shut comes from the evaporator fan inside the freezer. A hum from the bottom of the cabinet points to the condenser fan. We confirm by running each one.

Why does my KSRP22FT ignore the temperature setting?

The control board may have aged out, or a sensor may be reading wrongly. We test the sensor first, then the board, and check part availability before quoting any board replacement.

Book a visit

Book repair for your KSRP22FT

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Schedule Service