Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent KitchenAid specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 903-2606 Schedule Service
Model library · KitchenAid Refrigerator

KTRA19EL

KitchenAid KTRA19EL Refrigerator Repair

KitchenAid refrigerator

Most common issues on this model

  1. An aging control board; we confirm one can still be found before anything else
  2. A noisy or stalled freezer fan that leaves the fresh food side warm
  3. Airflow choked by lint at the condenser, the usual reason an old cabinet loses ground
  4. Loose handles and worn hinges or closers after many years of use

The KTRA19EL is a discontinued refrigerator that was sold under several full numbers: KTRA19ELBL, KTRA19ELSS and KTRA19ELWH. The letters after the base number show the finish, and all of them share the same working parts. It is the kind of cabinet found in a garage, a pantry nook or a second kitchen, often with its back too close to the wall.

That is why airflow is the first thing we measure. A cabinet pushed tight against a wall cannot shed heat, and the compressor runs hotter every summer. We pull it forward, vacuum the condenser coil, and test the fan. Inside, we listen for the evaporator fan and check that the control board still responds, since boards are the parts most worth confirming before a repair is approved.

You receive the price in writing before we begin, and the work comes with a 30-day workmanship warranty.

Key features

  • Refrigerator model KTRA19EL
  • Variants KTRA19ELBL, KTRA19ELSS, KTRA19ELWH
  • Discontinued model
  • Suffix letters give the color
→Codes

Error codes this model can show

KTRA19ELKTRA19EL questions
Does the finish letter at the end of KTRA19EL matter for repairs?

Not for most parts. BL, SS and WH only describe the cabinet color or finish, and the cooling parts are the same. It helps us order the correct door panel or trim piece, so please read the full number.

My KTRA19EL is in a garage and struggles in summer. Why?

Garage heat plus a dusty condenser makes the compressor work much harder. We clean the coil, check the fan, and confirm the cabinet has clearance behind and above. Those steps often restore normal cooling without any part replacement.

What do you check first when a KTRA19EL ignores its temperature setting?

We read the temperature inside with our own thermometer, then test the sensor and the control board. If the board has failed, we confirm a replacement is obtainable before we quote, so there are no surprises.

Book a visit

Book repair for your KTRA19EL

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Schedule Service