KitchenAid KURR104E Refrigerator Service
A KURR104E that leaves a damp patch behind it is telling us about the inlet valve. The leak is a slow weep rather than a burst line, so it hides until the floor has absorbed it. We pull the cabinet out, dry the area, and test the valve at the connection and the outlet side. Versions sold as KURR104EPA and KURR104ESB share the same layout.
When the cabinet is simply dead quiet and warm, the start relay is a short test away. It fails often enough that we check it before looking at the compressor. If instead the controls ignore what you set, the control board is the part under suspicion after the usual wiring checks.
A rising whine or a rattle that changes when the door is held shut points to the evaporator fan. Before we do anything, we give you a written price. Repairs come with a 30-day workmanship warranty.
If the water appears near the supply connection and the puddle grows slowly, the valve is the likely source. We shut off the supply, dry the area, and test the valve under pressure.
Not necessarily. A failed start relay can keep a healthy compressor from starting. We test the relay and the overload first, because they are quick checks and a far lighter repair.
It can be a control board that has aged out, or a sensor feeding it wrong readings. We check the sensor and connectors first, then test the board output before recommending a replacement.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
