KitchenAid KFIS20XV Fan and Airflow Repair
The KFIS20XV, also sold as the KFIS20XVMS, has a long list of plate revisions, from KFIS20XVMS00 up to KFIS20XVMS11, so our first move is reading the plate and matching it to the right parts. After that, we listen to the cabinet. A noisy evaporator fan motor, or one that quits and leaves the fresh-food side warming while the freezer holds, is a frequent finding.
Airflow outside the cabinet is just as important. When the condenser coils are packed with lint, an older refrigerator slowly loses its hold on temperature, and cleaning the coils is the most common cure we perform. The compressor then runs cooler and cycles off sooner.
Years of daily use wear out the handle, hinges and door closer, so we check that the door swings shut by itself. If water is turning up under the crispers or on the floor, the defrost drain is blocked and gets cleared. We quote in writing before starting, and a 30-day workmanship warranty covers our work.
The evaporator fan is probably stalled or failing, so freezer air never reaches the fresh-food side. We test the motor and replace it if it is noisy or has stopped.
Heat cannot leave, so the compressor runs longer and the cabinet slowly warms. We clean the coils and check the fan beside them, which is often all it takes to restore normal cycling.
The hinge parts or the closer, depending on what is worn. We adjust the door level, fit new parts and test that it comes to rest against the gasket all the way around.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
